The float fishing tackle, which is used by many fish hunters, is a type of fishing gear with a bobber, and it can be used at sea or in freshwater. You can catch fish such as mullet, bass, and meager in freshwater, as well as fish such as carp and rudd in salted water. Before preparing a float fishing gear, the first thing you should think about is what kind of fish you want to catch. If the size of the freshwater fish is 1 kg or less, 0.25 mm fishing line and 5-6 brown needles are suitable. On the other hand, for catching mullets this needle should be reduced to 10 and the line should be set to 0.15-18 mm. Do not mix float fishing tackle with normal bottom fishing. The choice of sinker in the float is entirely related to the bobber itself.
Bobbers have an important place in angling. They are widely used in angling in lakes, streams, sea bays and shallow places. The bobber acts as a buoyant and ensures that the bait fishing hook remains visible above the fish, making it visible when the fish is caught. Bobbers have been developed in different models according to their intended use.
When it comes to a bobber, you shouldn’t just think of plastic material. In very shallow waters you can use bottle cork instead of using a bobber. If you are going to use bottle cork, you should also use 4-5 grams of bead sinker.
What Is A Bobber
Bobbers are generally used in freshwater fishing but can be widely used in various seas, helping to keep the fish feed at the desired depth and body upright, sinking or shaking when the fish hit the materials to warn the fisherman. The fishing bobber is not used in very deep waters. It is especially used in lakes and stagnant waters, in low waters or in calm sea bays and in shallow areas.
Bobbers are also used by sailors as navigational aids. Bobbers, which are floating reservoirs connected to the bottom of the sea, can also be used to indicate dangers in the sea or an existing wreck or rocky and shallow areas. Bobbers with or without light are also available. The bobbers used as illumination are used to give warning signs.
What Are Bobbers Made Of?
The bobber is generally made of wood, or light materials such as cork, plastic or foam. It can be used in different shapes and weights depending on which field it will be used. The most important issue at this stage is to adjust its balance correctly. The balance of the bobber equipment is adjusted by means of pinches.
The choice of sinker for a fishing bobber is all about the bobber itself. Weights can be adjusted with sinkers or mobile sinkers as required. If a sheet sinker is to be used, a soft piece of paper or cloth should be wrapped beneath the line before wrapping. This will prevent damage to the line. At this stage, which material will be used depends on the fishing bobber. One of the most preferred bobber models, the transparent color sinking type Bombarda system ranging 15 to 35 grams can be used. Apart from this, it is very advantageous to use Bombarda system bobbers in order to throw your artificial feeds away and to the desired point. The most important feature is its slowly sinking structure. The bobber series with crystal transparent color is also an advantageous and ideal method for use in shallow and clear water conditions.
Apart from this, another most preferred bobber model is the white floating type Bombarda system. This bobber model is available in options from 15 to 35 grams. One of the biggest advantages is that the bobber is very easy to discharge even in windy weather. Since it has a floating structure, it is very convenient for pulling the line back. Fladen Phosphoric Bobber Set, which is one of the light bobber models, is also widely preferred due to its economical feature and high quality.
Why Use a Bobber
In fishing, bobber and sinker are used to position the bait in the appropriate places in the water. The bobber remains on the water while helping the fishing tackle hangs under it and the sinker is located on the bottom and ensures that the fishing line is submerged in the water and remains perpendicular to the water. Bobbers of different capacities and sinkers in different weights are specially designed and prepared according to the type of fish that you want to catch. Even very simple materials can be used as bobbers such as sponge pieces, foam sheets, and plastic parts which are lightweight and can swim. These type of bobbers are widely used in amateur fishing, while bobbers made of robust and durable polyurethane materials are more preferred by professional anglers.
While the feeds are positioned at the appropriate depth in the water, the tendency of the bobbers to swim and the tendency of the sinkers due to their weight are utilized. If your bobber is too large, the feed may not sink to the required depth, and if your sinker is too heavy, it will sink to the bottom of the water by submerging the bobber. For this reason, hanging and ruptures in the fishing tackle are frequently seen, and the tackles lost their function by breaking, continue to hunt in the water, causing ghost hunting.
Bobbers are mostly used in freshwater hunting and sometimes in seas, to keep the feed at the desired depth and the body upright. When the fish hit, they sink, swing or ascend to warn the fisherman. It is difficult to use bobbers in very deep waters. They are used in angling especially in lakes and stagnant waters, in small streams, in calm sea bays, and in shallow places. They are usually made of wood (balsa wood is the most acceptable), and light materials such as cork, plastic or foam. They are of different shapes and weights depending on their usage areas.
The most important issue is good balance adjustment. The balance of the bobber should be adjusted to keep it on the desired level. The structure of the corks and bobbers remaining on the surface of the water shows different connection methods, depending on the type of fish to be hunted and the type of hunting. The bobbers should be flat in the sprag tackles, while the bites of the fish can be felt much more easily if they are kept submerged in single needle pinch sinker tackles. If the bobber becomes flat, it will be an indication that the fish has taken the feed.
- Waggler Bobber
While hunting with a Wagger bobber, preferring the ones with fishing line is under the bobber will ensure that the body remains underwater and thus is not affected by the wind. At the top of these bobbers, there are colored areas showing various levels. When the desired water level is determined, the bobber is fixed on the fishing line with the help of the stopper.
The weights can be adjusted with either clamping sinkers or mobile sinkers as well as with sheet sinkers. If a sheet sinker is to be used, wrapping a soft piece of paper or cloth underneath the line before wrapping will ensure that the line is not damaged. If a mobile sinker is used, the use of a small bead ensures that the knot is not damaged.
- Bobbers Used in Catching Carnivorous Fishes Such As Pikes
1- Stubby inline bobber: It is used with big dead or live bait (like mackerel).
2- Dead bait pencil: Designed to be used more than 30 m distance. It is used for hunting in bottom regions with dead bait.
3- Hi-visibility dart: It is a type of squat bobber that provides excellent visibility especially in raised waves. Suitable for long-distance hunting. It is used with dead feed. It can even show sensitive bites of fish.
4- Sunken: It is used for the presentation of live or dead feed just below the water surface. It is used in slow-flowing streams and still waters.
5- Ball bob: A classic bobber for carnivorous fish hunting. Ideal for streams and stagnant waters. It provides free circulation of live fish and is used for the presentation of dead feed both at the bottom and on the hanger. However, it is not as sensitive as other thin bobbers and is difficult to launch.
6- Slimline inline: Designed for use with live or dead feeds in rivers. The line is passed through the bobber (Inline) and is used with a stopper.
- Stick Bobber
It is one of the most used bobbers in river fishing. Unlike the Waggler bobbers, there is no section on the upper part that indicates measures. When the fish are caught, these bobbers enter into the water. The structure of a stick bobber can be summarized as follows:
Body: Buoyant balsa wood is preferred, but it can also be made of cork and polystyrene material.
Stem: This part is made of reinforced solid materials. The most commonly used materials are aluminum, heavy lignum tropical trees, plastic, and bamboo cane. While straws are preferred in stagnant waters, aluminum ones are preferred in turbulent waters in terms of speed, lignum wood bobbers are preferred due to their weight, and plastic and nylon ones are preferred because of their cheap prices.
Shoulder: This section allows the bobber to float at a slow speed without sinking.
Tip: It is the part of the bobber above the water. When thrown over long distances, it increases both the extra power to prevent buoyancy and it ensures clear visibility. It also shows sensitive bites of fish.
- Premier Feeder Float
This Wagler bobber can be used at a depth of 2-3 meters and it both can be fed and can be used as a bobber. Thanks to its adjustable apparatus, feeds are slowly poured into small pieces through the holes or small maggots emerge from these holes. Since the bobber is connected to the line by means of an apparatus, it can be easily disassembled and refilled. The distance between the swivel and the hook should be around 30 cm.
This oval-shaped bobber, which can be called almost classic, is suitable for use in still or light flow waters. It can be used from slightly choppy water to choppy and windy weather conditions. Can be loaded to sink deep. Pyramid-shaped bobbers can be used easily in flowing waters and have a high bearing capacity. Although it resembles an oval-shaped bobber, it can be used in flowing waters and windy weather with its more hydrodynamic structure.
Thin long bobbers are suitable for use in windless, light flow waters. These types are mostly used with special long rods; connected to the end of the reed, not with roller tools. They are more suitable for medium and hard currents. They are mostly used on the tip of the rod. They are used in stagnant or slightly flowing waters with an almost inverse oval form. Cylindrical ones are used in all waters and conditions.
Connect to the main body so that it can move freely on the side main body without using any stoppers, stabilizer beads, etc. Throw your fishing line to the desired distance. Whatever your depth, your fishing line will go down to the bottom and the bobber will lie flat. When the lead sits on the ground, the water tank automatically fills and brings the bobber to an upright position. The iron ball in the water tank adheres to the magnetic field at the bottom of the chamber and secures the line. With this upright movement, your fishing rod will stretch approximately 30 cm and take the space between the bobber and the sinker to ensure that the baits are visible under all circumstances.
Since the fishing line remains horizontal to the land, the baits lie on the ground. In this case, it gets harder for the fish in the region to see the feed. If the area where the fishing line falls moss or stony, the bait can be completely lost. When you use a smart bobber, no matter what the ground type is, your fishing line will rise up to 30 cm. The fishing line between the bobber and the rod will remain taut in all conditions, so you feel the eating stroke of the fish much more easily. You can increase your chances by stretching the rod.